In our test, the Device holder from Garlavie an very good impression leave behind. The product consists of aluminum, plastic and rubber and impresses its light weight at the same time stable processing. The assembly is dead easy and can thanks to the simple installation instructions performed by anyone become. The customer has the choice between one glued or drilled fastening variant. Both variants are suitable for different surfaces and thus offer the customer various uses. If real all-rounder the product convinces with hooks and rubberized brackets that can be moved individually. Thanks to removable end caps, more or fewer brackets can be placed on the rail. The rubber makes for one secure hold of brooms or devices up to one Diameter of 3,1 cm. The device holder can weigh a total of 7 kg carry. If the customer is not satisfied with the product, he can within 30 days withdraw from the purchase.
Benefits
✅ low weight with stable processing
✅ Quick glue or drill assembly
✅ Multifunctional
✅ stable hold of the devices
✅ 30 Day Money Back Guarantee
Disadvantages
❌ no customer hotline available
The test
General Information
We got the article in the practical test examined and tested in detail. Below we go into more detail about the features and impressions. The product, from the packaging to the materials and quality to the range of functions and handling our test procedure subjected.
To give you a quick overview, we work with a points system. The maximum possible number of points per area is 100 points. The final overall grade is calculated from the average of all tested characteristics, taking into account the respective weightings. For a detailed insight into our comprehensive Evaluation process, which forms the basis of all our product reviews, please click here.
The first impression
The packaging and markings
ℹ️ Here we take a closer look at the packaging. Sustainability is becoming an increasingly important factor. In addition, of course, adequate protection of the product must also be ensured.
| Criterion | Remark | Points scored* |
|---|---|---|
| product protection | Cardboard is stable, product adequately protected | 100 points |
| sustainability packaging | Unnecessary packaging waste was avoided | 95 points |
| Total | 98 points |
*The maximum number of points is 100 points
Packaging
The Device holder from Garlavie came for our test in a typical shipping carton. This was on arrival undamaged and could easily be opened by peeling off the adhesive strip. Inside the box was the product wrapped in plastic. This type of packaging made it optimally protected against external influences and shipped hygienically. The product protection was thus fully guaranteed and the iso seat cushion in perfect condition delivered.
The packaging is partial recyclable. However, the plastic wrap can not recycled become. Nevertheless, the presentation of the product makes one very good impression.
After unpacking
The package contents and instructions
ℹ️ The first impression after unpacking sticks in most people's minds. Are the package contents complete and does the manufacturer make it as easy as possible for me to use the product directly?
| Criterion | Remark | Points scored* |
|---|---|---|
| Package Contents & Scope | Device holder including mounting material (screws or 3M adhesive tape) | 100 points |
| instructions | In German, illustrated, clearly written | 90 points |
| Contact information | Can be found on the product box, no customer hotline available | 90 points |
| Total | 93 points |
*The maximum number of points is 100 points
The scope of delivery includes the Device holder and mounting material. Depending on the type of installation 4 screws and dowels or 2 3M brand adhesive strips at. Proper assembly is on the Product box in German with pictures described. The Contact information are also on here. However, there is no customer hotline. However, we are talking about one very good way and wayto ship a product.
Unboxing
First time in hand
Product processing and appearance
ℹ️ Before we start the practical test, we take a close look at the product processing. How high-quality are the materials used? Are the haptics & optics satisfactory?
| Criterion | Remark | Points scored* |
|---|---|---|
| Visual Appearance | Very good visual appearance | 100 points |
| application | Very good workmanship | 100 points |
| stability | Sturdy | 100 points |
| sustainability of the product | No information about sustainability, but high-quality materials, 30-day money-back guarantee | 90 points |
| Total | 98 points |
*The maximum number of points is 100 points
for screwing or self-adhesive
First of all, it should be said that the device holder visually very good impression leaves. There are no processing errors recognizable. In addition, all transitions clean processed and no scratches or edges to see. The product consists of Plastic, Rubber and Aluminium and impresses with its relative low weight at the same time stable processing. In addition, the device holder impresses with its simple and timeless design.
No information can be found about the sustainability of the product. Due to the high-quality materials used, however, we assume one long lifespan out of. If the customer is not satisfied with the product, he will also receive a 30-day money-back guarantee.
That was the result of our practical test
Does the manufacturer keep its advertising promises?
ℹ️ Our practical test has the highest relevance and therefore the most weight. Here the product has to undergo a wide variety of criteria and tests. We check the functions and product promises of the test article.
| Criterion | Remark | Points scored* |
|---|---|---|
| Installation | Quick and easy assembly, also possible alone | 100 points |
| use | Stable hold, anti-slip design | 90 points |
| Funktionalität | Suitable for many surfaces, hooks, individual sliding, up to 7 kg load capacity, opening the ends possible | 100 points |
| Variants | Self-adhesive or screws | 100 points |
| Total | 98 points |
*The maximum number of points is 100 points
The use of Garlavie device holder did us at the test much joy prepares. The Installation is dead easy and can thanks to the simple installation guide be carried out by anyone. The customer can choose between the glued and the drilled fastening variant choose. The self-adhesive version sticks to tiles, tiles, marble, smooth wood and metal plates. For all other grounds the drilled attachment is suitable.
In the test, the device holder was drilled into the wall. The screws were with one Length of 2,6 cm sufficient. Then the product sat firm and wobble-free on the wall. The individual elements could be any postponed become. However, it should be noted that the mounts slip easily can. The hooks, on the other hand, remain in place. The End caps can remote be used to place more or fewer brackets on the rail. The rubber makes for one secure hold of brooms or devices up to one Diameter of 3,1 cm. Cleaning rags or brushes, for example, can be hung up on the hooks. Overall, the device holder carries a weight of 7 kg.
Currently customers can choose between two mounting options and buying one Set of two or one product choose.
Nahaufnahme
Price-performance ratio
and consumer reviews
ℹ️ Finally, let's talk about how the product compares to the competition. Can it keep up with the competition in terms of price and quality? Would we generally recommend a purchase? We also examine consumer reviews and verify that the critical and positive reviews are actually justified.
| Criterion | Remark | Points scored* |
|---|---|---|
| Price-performance ratio | Very good! | 90 points |
| rating cut | 4,5 out of 5,0 on Amazon | 75 points |
| Total | 83 points |
*The maximum number of points is 100 points
On the platform Amazon Consumers give the product an average rating of 4,5 stars given. It is criticized that the quality is not satisfactory and the garden tools do not fit in the holder. Other reviewers, however, praise the Quality, the material moisture meter shows you the secure hold of the devices – including the garden tools – as well as the functionality in general and recommend the product. In our practical test, we were able to confirm that the device holder is of high quality and holds devices with a diameter of up to 3,1 cm. It is positive that the Manufacturer responds to customer feedback, analyzes problems and adjusts its product accordingly.
For equivalent products, prices are quoted on the Internet from up to € 60 required. On the other hand, very inexpensive products are already available from € 10. Thus lies the Device holder by Garlavie with a price of current 19,90 € in the lower price segment. Consequently this is price ratio for the quality and scope of services you get, very well.
Gesamtergebnis
| weighting | Points scored* | |
|---|---|---|
| 1. Packaging & Labels | 10% | 98 points |
| 2. Package Contents & Instructions | 10% | 93 points |
| 3. Product Processing & Appearance | 20% | 98 points |
| 4. In the practical test | 40% | 98 points |
| 5. Price/Performance & Consumer Ratings | 20% | 83 points |
| Total | 95 points |
The Device holder of the brand Garlavie therefore receives one from us Overall score of 1,3 and has thus been successfully certified for our test seal. The test was in the test period 03/23 carried out and entered into our database under the license number 230225003 guided. You can find more information about our testing procedure at www.prüfengel.de/test procedure.
Test result:
1,3
