The Velcro license plate holder from Roadz have a total of one in our test very good Leave an impression. The set consists of two license plate holders, each consisting of three barbed hook and loop fasteners and three looped hook and loop fasteners. In addition, two alcoholic cleaning cloths included. The license plate holders are frameless, since the entire holding mechanism is hidden on the back. This gives the vehicle a special look noble look. All components of the set were also successful in the practical test convince. It is true assembly effort higher compared to a conventional screwed license plate holder, but both the adhesive and the Velcro connection hold up very well.
Benefits
✅ Good hold of the license plate
✅ Upgrade of the vehicle optics
✅ Cleaning wipes included
✅ Can also be mounted with a curve
Disadvantages
❌ Increased installation effort
❌ Velcro straps could be wider
The test
General Information
We got the article in the practical test examined and tested in detail. Below we go into more detail about the features and impressions. The product, from the packaging to the materials and quality to the range of functions and handling our test procedure subjected.
To give you a quick overview, we work with a points system. The maximum possible number of points per area is 100 points. The final overall grade is calculated from the average of all tested characteristics, taking into account the respective weightings. For a detailed insight into our comprehensive Evaluation process, which forms the basis of all our product reviews, please click here.
The first impression
The packaging and markings
ℹ️ Here we take a closer look at the packaging. Sustainability is becoming an increasingly important factor. In addition, of course, adequate protection of the product must also be ensured.
Criterion | Remark | Points scored* |
---|---|---|
product protection | Mailer is stable, product adequately protected, but product box is slightly dented | 90 points |
sustainability packaging | Unnecessary packaging waste was avoided, the item was packed compactly | 100 points |
packaging convenience | The packaging was easy to open even without tools | 100 points |
Total | 97 points |
*The maximum number of points is 100 points
The Velcro license plate holder from Roadz were delivered in a compact cardboard mailer. The shipping bag was appropriately dimensioned and the license plate holder had little room to slip. Inside the shipping bag were the license plate holders with accessories in the product packaging. The Product packaging It was slightly dented but otherwise undamaged. Both the mailer and the product packaging were easy to open without tools.
The product packaging was one rectangular carton in an attractive black and blue design with a vehicle motif. It contained the under license plates for two license plates, alcohol wipes and a thank you note. The license plate holders consist of twelve individual parts and were in sets of three divided to allow for compact product packaging. Overall, the set is in the packaging well protected and unnecessary packaging material was dispensed with.
After unpacking
The package contents and instructions
ℹ️ The first impression after unpacking sticks in most people's minds. Are the package contents complete and does the manufacturer make it as easy as possible for me to use the product directly?
Criterion | Remark | Points scored* |
---|---|---|
Package Contents & Scope | Six Velcro strips each with loops and barbs, plus two alcohol cleaning wipes | 100 points |
Instructions | Written in German and understandable, unfortunately it is missing how the license plate can be removed again | 90 points |
Contact information | Can be found on the product packaging, no telephone number is given | 90 points |
Total | 93 points |
*The maximum number of points is 100 points
The set consists of two license plate holders each with three stick-on Velcro straps with barbs and three Velcro straps with fleece and two alcohol wipes. It is therefore a compact set with which license plates can be attached to the vehicle without a frame.
An Instructions in the form of assembly instructions can be found on the back of the product packaging. It explains in six steps how to mount the license plate holder on the vehicle. Unfortunately, how the license plate holder can be removed again is not part of the instructions. The text is written in German and is easy to understand. In addition, the assembly steps are illustrated.
Contact information is on the product packaging Contact details specified. These include the company name, address and an email address. Unfortunately, no phone number is given.
First time in hand
Product processing and appearance
ℹ️ Before we start the practical test, we take a close look at the product processing. How high-quality are the materials used? Are the haptics & optics satisfactory?
Criterion | Remark | Points scored* |
---|---|---|
Visual Appearance | Velcro material of high quality and uniform | 100 points |
application | Good workmanship of the Velcro straps with precise cut edges | 100 points |
stability | Velcro straps are tear-resistant and interlock well | 100 points |
sustainability of the product | High product quality indicates a long service life | 100 points |
Total | 100 points |
*The maximum number of points is 100 points
The under license plates are respectively six-part and consist of black Velcro. Each license plate holder consists of three loop tapes and three hook tapes together. The front of the ribbons is all over coated with the respective Velcro material. On the back there is also the full surface Adhesive surface. When delivered, there is still a transparent one on the adhesive surface protector, which is deducted for assembly. Three Velcro strips are glued to each protective film. The Size: the strips are 9 cm by 4,5 cm. As with license plates, the corners of the strips are rounded so that they do not protrude after installation. A license plate holder consisting of three loop tapes and three hook tapes weighs only 20 g including the protective film. That completes the license plate holder significantly easier than conventional license plate holders made of plastic.
In the cleaning wipes are folded disposable cleaning wipes with an alcohol content of 75%.
That was the result of our practical test
Does the manufacturer keep its advertising promises?
ℹ️ Our practical test has the highest relevance and therefore the most weight. Here the product has to undergo a wide variety of criteria and tests. We check the functions and product promises of the test article.
Criterion | Remark | Points scored* |
---|---|---|
Installation of the license plate holder | Can also be carried out without technical knowledge, increased installation effort compared to screwing | 85 points |
License plate holder seat | Very good hold when glued correctly, but greater security would be possible with wider Velcro straps | 90 points |
Optics of the license plate holder | License plates are completely frameless, resulting in a flawless look | 100 points |
Total | 92 points |
*The maximum number of points is 100 points
Our field test we carry out on the rear bumper of a standard compact car. Here we first remove the old license plate holder. This one is at four screws attached to the plastic of the bumper and dismantled accordingly quickly. The Velcro straps are attached with a adhesive connection attached to the rear bumper and license plate. Adhesive joints can be very high forces transferred, but require a corresponding Handling. That's why we strictly follow the specifications of the installation during assembly Operating manual.
The assembly takes place in several work steps. First, the area of the rear bumper where the license plate is to be attached is identified using one of the alcohol wipes thoroughly gereinigt and subsequently optional. Subsequently there will be three Velcro with barbs attached. We fasten one of the tapes in the middle of the vehicle, the other two so that the outer edge is just inside the license plate. Instead of measuring, you can simply use the removed license plate as a template. In principle, it must be ensured that the bumper in the area of the Velcro straps has a continuous surface having. For example, it is not possible to attach the Velcro strips to the grille of a radiator grille.
Since the Velcro straps are slightly smaller than the license plate itself, it is accurate to the millimeter Positioning not mandatory. In our test, we use the holes in the bumper into which the old license plate holder was screwed as a guide for positioning. It is important to ensure that the adhesive tapes are already in the first step sufficiently accurate be glued on, as a renewed detachment due to the high adhesive strength of the adhesive not is possible.
In the next step, the back of the indicator cleaned and also dried. The Velcro strips are attached here at the same distance as on the bumper, so that when attaching the license plate the hook and loop strips right on top of each other lie.
Now it can License-plates an der bumper attached become. The Velcro straps are about two centimeters shorter than the number plate. This difference can fine alignment be used by placing the loop tape and the Velcro tape slightly offset on top of each other. If necessary, the license plate careful removed and reattached .
Overall, due to the good description, the assembly is also suitable for users who are not technically gifted problem-free feasible. However, he is assembly effort through the cleaning and the triple positioning (bands on the vehicle, bands on the license plate, license plate on the vehicle) compared to screw plates increased. The license plate holder is also for mounting on any arched bumpers suitable. The limit here is not the license plate holder, but the flexibility of the license plate.
After drying liable the mark fixed on the vehicle, detachment while driving not to be feared. Still, with wider bands would be one higher adhesion been possible. In our case, we carried out the test on a license plate with the standard width of 52 cm. Stay here approx. 3/4 the back from the Velcro straps Free. So there would have been plenty of room for wider tapes.
Particularly positive falls the optics on. Unlike many alternative solutions, the Velcro license plate holder is actual frameless, since the entire holding mechanism is hidden behind the license plate.
Price-performance ratio
and consumer reviews
ℹ️ Finally, let's talk about how the product compares to the competition. Can it keep up with the competition in terms of price and quality? Would we generally recommend a purchase? We also examine consumer reviews and verify that the critical and positive reviews are actually justified.
Criterion | Remark | Points scored* |
---|---|---|
Price-performance ratio | Very good quality in the lower price segment | 90 points |
rating cut | 4,5 out of 5,0 on Amazon | 75 points |
Total | 83 points |
*The maximum number of points is 100 points
On the platform Amazon Consumers give the product an average rating of 4,5 stars given. It is often criticized that the surface of the Velcro is too small. Many customers like the fact that the adhesive connection holds well and the high-quality look. In our practical test, we were able to confirm the successful appearance and the good hold of the adhesive connection after assembly. However, we can also understand that the small area of the Velcro straps on standard license plates still offers room for improvement, and an even better hold could be achieved with a larger area.
For equivalent products, prices are quoted on the Internet from up to € 25,09 required. Very inexpensive products are already available from € 7,99. Roadz license plate holder is currently at a price of 9,99 € thus in lower price segment. For the quality and scope of services you get, that is Price ratio very good.
Gesamtergebnis
weighting | Points scored* | |
---|---|---|
1. Packaging & Labels | 10% | 97 points |
2. Package Contents & Instructions | 10% | 93 points |
3. Product Processing & Appearance | 20% | 100 points |
4. In the practical test | 40% | 92 points |
5. Price/Performance & Consumer Ratings | 20% | 83 points |
Total | 92 points |
The Velcro license plate holder of the brand Roadz therefore receives one from us Overall score of 1,4 and has thus been successfully certified for our test seal. The test was Test period 03/23 carried out and entered into our database under the license number 230225006 guided. You can find more information about our testing procedure at www.prüfengel.de/test procedure.
Test result:
1,4