Solder connectors being tested in 2023

The Solder connector set from Baurix has a total of one in our test very good Leave an impression. The set consists of 120 solder connectors in come different sizes and an assortment box. A helpful instruction manual is also included. Also in field test could the set full convince. With the set you can Cables very quick and easy connection. Previous soldering with a soldering iron is not necessary. The emerging insulation holds the cables fixed together and yet is flexible. In addition, the solder connector fits snugly to the cable and creates a seal thanks to the additional adhesive inside waterproof connection.

We got the article in the practical test examined and tested in detail. Below we go into more detail about the features and impressions. The product, from the packaging to the materials and quality to the range of functions and handling our test procedure subjected.
To give you a quick overview, we work with a points system. The maximum possible number of points per area is 100 points. The final overall grade is calculated from the average of all tested characteristics, taking into account the respective weightings. For a detailed insight into our comprehensive Evaluation process, which forms the basis of all our product reviews, please click here.

ℹ️ Here we take a closer look at the packaging. Sustainability is becoming an increasingly important factor. In addition, of course, adequate protection of the product must also be ensured.

The Solder connector set from Baurix was delivered together with other products in a common shipping carton. The Vshipping carton was compact and the individual products had no place to slip. There was one in the shipping box assortment box, which at the same time as Product packaging served. Due to the right size of the shipping carton, the assortment box could not slip in it. The assortment box was undamaged and in perfect condition. Both the shipping carton and the product packaging were easy to open without tools.
The assortment box was in a clear Plastic film shrink wrapped. The film prevents the assortment box from being opened unintentionally and offers additional Protection against dirt and damage during transport. Since the assortment box is sufficient robust is and about a solid locking mechanism has, in our view, would have on the slide waived can be. Positive to evaluate is that the assortment box even as Product packaging serves and no additional packaging is used.

ℹ️ The first impression after unpacking sticks in most people's minds. Are the package contents complete and does the manufacturer make it as easy as possible for me to use the product directly?

The Set consists of one assortment box, into which different colored solder connector in come different sizes are sorted. According to the manufacturer, the set contains a total of 120 solder connectors, where the number of individual sizes differs. There are 30 of the smallest size and ten of the largest. The two middle sizes are each present forty times. A random check approved these manufacturer specifications.
On the inside of labels the assortment box is one Instructions printed. It explains how to use the solder connectors in three simple steps. The text is in German Language is written and is through Illustrations supports. In addition, on the assortment box are the Key data the solder connector specified.
The Contact details are also on the assortment box. They are on the outside and include the company name and address. Unfortunately, neither an e-mail address nor a telephone number is given.

ℹ️ Before we start the practical test, we take a close look at the product processing. How high-quality are the materials used? Are the haptics & optics satisfactory?

The assortment box consists of transparent Plastic and is made in two parts. The upper part serves as a lid and comes with a double-sided printed label label Mistake. On the outside, in addition to the contact details, there is a list of the content with the relevant key data. On the inside is the Instructions as well as a copy of the list from the outside. There is also a buckle on the lid with which the lid can be opened and closed again locked can be.
The lower part the box is in seven individual subjects divided into which the solder connectors by size sorted are. Apart from the smallest size, each size occupies two compartments. Overall the assortment box Sufficiently stable, well made and very convenient.
In the solder connectors are essentially soft, transparent plastic tubes. Inside the tubes are three rings, which divide the tubes into four sections of equal length. The two outer rings make coloured, each color being a specific Size assigned. The middle ring has one contains solder and is not quite as soft as the rest of the tubes. The solder joints aren't quite even and some rings are a bit crooked. However, this should not be a disadvantage for the Funktionalität represent. Otherwise the processing is not objectionable.
The size of the solder connectors depends on the Cable cross sectionfor which they are suitable. The smallest size can be used from a cable cross-section of 0,2 mm², the largest up to a cable cross-section of 6 mm². It should be noted that there are between sizes Gaps there, so for certain sizes save Solder connectors are present. For example, the second largest solder connector is only suitable up to a cable cross section of 2,5 mm², while the largest solder connector can only be used from a cable cross section of 4 mm². The Length of each solder joint is 26mm for the smallest size and 40mm for the other three sizes.

ℹ️ Our practical test has the highest relevance and therefore the most weight. Here the product has to undergo a wide variety of criteria and tests. We check the functions and product promises of the test article.

In test we the solder connectors without cable, to the shrink rate and the change of material properties to check. Through Heat are the colored rings showing off adhesive exist, and that solder of the middle ring soft. The transparent plastic tubes pulls like a shrink tubing together. Our test shows that the diameter of the solder connectors increases as a result of heating halved.
In addition to the diameter, the shrinkage also changes the Stiffness the solder connector. This is clear for all sizes after shrinking increased. However, this is entirely in the interests of the user, since bending forces can be included from the body to be isolated and thus the burden the actual cable reduced becomes. Nevertheless, the solder connectors remain in the shrunken state flexible. Our test also shows that the solder connectors waterproof are.
In another test, we put the solder connectors in the Practice a. A typical application is a broken cable. Due to the sorting in the assortment box, the suitable size found fast. The solder connector slides easily onto the cable. As Heat source not only can a heat gun be used, as recommended in the instructions for use, but in an emergency this can also be done with a standard lighter. At the Heat the solder connector contracts as far as the cable inside will allow. This puts the solder on the cable insulation at and writes away. In addition, the soft solder is attached to the exposed wires in the middle of the connector pressed and these with each other soldered. In contrast to conventional shrink tubing is therefore no prior soldering of the wires with a soldering iron is required.
The resulting one insulation seated fixed and does not slip through the adhesive. It is also stiffer than traditional cable jackets, yet flexible. The cable ends are stable together Connection and cannot be pulled apart. With the Lsolder connection set from Baurix can therefore quickly, easily, waterproof and carefully isolated .

ℹ️ Finally, let's talk about how the product compares to the competition. Can it keep up with the competition in terms of price and quality? Would we generally recommend a purchase? We also examine consumer reviews and verify that the critical and positive reviews are actually justified.

On the platform Amazon Consumers give the product an average rating of 4,4 stars given. It is often criticized that the solder would not melt and therefore would not create a solid connection. Other customers, on the other hand, are very satisfied because the soldered connectors create stable and watertight connections. In our practical test, the melting of the solder worked perfectly, so we can only confirm the impression of satisfied customers.

For equivalent products, prices are quoted on the Internet from up to € 22,99 required. Very inexpensive products are already available from € 6,99. The Solder connector set from Baurix is currently at a price of 11,99 € thus in lower price segment. For the quality and scope of services you get, that is Price ratio very good.