In our test, the Step drills from monekystrong an very good impression leave behind. The drill has 14 steps between 4 mm and 30 mm, allowing you to drill holes in different diameters. It should be noted that holes with a constant diameter can only be drilled up to a material thickness of 4 mm. The shaft with a diameter of 10 mm is also for standard cordless screwdrivers suitable. Drilling is also possible with a cordless screwdriver Wood and Plastic flawless. For drilling Metal However, a bench drill is recommended, otherwise the holes will not be exactly round. As an additional extra, the Product packaging also for long-term storage of the drill.
Benefits
✅ High quality of the drill
✅ Drilling in wood, plastic and metal
✅ Different diameter holes
✅ Very good product packaging
Disadvantages
❌ Material thickness only up to 4 mm
❌ Metal precise only with bench drill
The test
General Information
We got the article in the practical test examined and tested in detail. Below we go into more detail about the features and impressions. The product, from the packaging to the materials and quality to the range of functions and handling our test procedure subjected.
To give you a quick overview, we work with a points system. The maximum possible number of points per area is 100 points. The final overall grade is calculated from the average of all tested characteristics, taking into account the respective weightings. For a detailed insight into our comprehensive Evaluation process, which forms the basis of all our product reviews, please click here.
The first impression
The packaging and markings
ℹ️ Here we take a closer look at the packaging. Sustainability is becoming an increasingly important factor. In addition, of course, adequate protection of the product must also be ensured.
Criterion | Remark | Points scored* |
---|---|---|
product protection | Cardboard is stable, product adequately protected | 100 points |
sustainability packaging | Apart from the foil around the instructions for use, unnecessary packaging waste was avoided | 90 points |
packaging convenience | No tools needed to open, packaging can be used permanently for storage | 100 points |
Total | 97 points |
*The maximum number of points is 100 points
The Step drills from monkeystrong came in a recyclable Shipping box at. The compact Product packaging was good against slipping inside the shipping carton using cardboard-based recycled material protected. No bubble wrap was used. In the Product packaging was the step drill along with the instructions for use. The product packaging is made of transparent plastic and consists of an inner sleeve and an outer sleeve. The outer sleeve contains, among other things, the product designation, a picture of the drill and recommendations for the drill speed depending on the grade and material. By nubs on the Outside the inner sleeve is the product packaging for different drill bit sizes usable and also fits the step drill. She is also for permanent Storage of the drill suitable. In order to provide additional protection for the tip of the drill, it is covered by a small rubber cap. Unfortunately, the instructions for use were also in one Plastic film packed up. This would not have been necessary for reasons of sustainability. Both shipping carton and product packaging can also be without tools open easily.
Due to the shipping carton, product packaging and rubber cap on the tip, the tool is safe during transportation outstanding from dirt and bumps protected. Accordingly, the first impression of the product is consistent convince.
After unpacking
The package contents and instructions
ℹ️ The first impression after unpacking sticks in most people's minds. Are the package contents complete and does the manufacturer make it as easy as possible for me to use the product directly?
Criterion | Remark | Points scored* |
---|---|---|
Package Contents & Scope | Step drill and product packaging suitable as a storage box | 100 points |
Instructions | Written in German, comprehensive and understandable | 100 points |
Contact information | Can be found on the product packaging, unfortunately without a telephone number | 90 points |
Total | 97 points |
*The maximum number of points is 100 points
The Step drills comes, apart from the product packaging suitable as a storage box, without accessories. This is also not necessary, since only a drill or a cordless screwdriver is required to use the drill.
The Instructions is in the product packaging. She is fully up German written. It includes a description of the drill and its Functionality, a listing of suitable Materials and Suggestions for the use. The speed table is also included in the instructions for use. This means that the product can also be used by do-it-yourselfers who have not previously worked with a step drill.
Contact information can be found on the instructions for use and on the product packaging. The operating instructions contain the company name and an e-mail address. In addition to this are on the Product packaging also the company address and the name of the managing director. Unfortunately, a telephone number is not given.
First time in hand
Product processing and appearance
ℹ️ Before we start the practical test, we take a close look at the product processing. How high-quality are the materials used? Are the haptics & optics satisfactory?
Criterion | Remark | Points scored* |
---|---|---|
Visual Appearance | High-quality with printed diameters of the individual steps | 100 points |
application | Very good workmanship with sharp edges | 100 points |
stability | One-piece metal construction ensures high stability | 100 points |
sustainability of the product | High quality means that you can expect a long service life | 100 points |
Total | 100 points |
*The maximum number of points is 100 points
The Step drills is 10 cm long, of which 2 cm is the shaft. The shaft of the drill has a diameter of 10 mm and is therefore suitable for standard drills. The diameter of the drill bit is between 4 mm in the first stage and 30 mm in the highest stage. The steps are increasing in 2 mm steps and each have a length of 4 mm. Only the first and the last step are 6 mm long. The heels between the steps are slanted and should be deburring allow the drilling. In addition, the drill has a on two opposite sides spiral, to allow the drilling chips to be evacuated. To facilitate drilling to a specific diameter, the individual steps are marked with their respective diameters labeled. So that the lettering does not wear out, it lies within the spiral groove. To protect the drill from corrosion during transport and storage, it is covered with a thin layer drilling fat overdrawn. The mass of the drill is 157 g.
In summary, the twist drill makes a well thought-out and quality impression. It has a clean finish and the cutting edge is very sharp.
That was the result of our practical test
Does the manufacturer keep its advertising promises?
ℹ️ Our practical test has the highest relevance and therefore the most weight. Here the product has to undergo a wide variety of criteria and tests. We check the functions and product promises of the test article.
Criterion | Remark | Points scored* |
---|---|---|
drilling plastic | Fast and precise, burr-free from 8 mm, even with a cordless screwdriver | 100 points |
drilling metal | Imprecise with the cordless screwdriver, bench drill recommended, good deburring of the edge | 80 points |
drilling wood | Fast and precise, even with a cordless screwdriver | 100 points |
Flexibility | One drill for different materials and hole diameters | 100 points |
Total | 95 points |
*The maximum number of points is 100 points
In our field test let's start piercing Plastic. A 3 mm thick rigid foam board serves as the test object. The attachment succeeds problem-free, the drill does not jump. The first step penetrates the material after a short time. The other stages penetrate the plastic even faster. From the 8 mm step are the edges of the holes burr free. On the steps below, the ridges can be easily plucked off with your fingers.
Next we test the drill thin sheet metal. Here the drill needed significantly longeruntil the first stage cuts through the metal sheet. When applying the cordless screwdriver, care must also be taken to ensure that the drill does not start slipped. With the cordless screwdriver, the holes are not exactly round, but are reminiscent of a Reuleaux triangle. However, as the diameter increases, the bores become more circular. Accordingly, the use of one is for drilling metal Tischbohrmaschine to recommend. Exactly round holes are also possible with this. It works flawlessly deburring the top through the bevel to the next step. Depending on how deep the slant is drilled, a Phase be created at the edge of the borehole.
Finally we test the drill Wood and a 3 mm thick MDF board. In both cases, the behavior of the drill is comparable to drilling plastic. The drilling succeeds fast and precise. Due to the properties of MDF, the edges of the drill holes fray. In the case of wood, the holes are precise and clean.
Overall, the step drill from monkeystrong scored well in our practical test very good Impression. The drilling of Holz and Plastic can also be done with a cordless screwdriver perfect. For drilling Metal a bench drill is recommended. basic can material thicknesses can be pierced up to 4 mm. With thicker materials, you have to accept that the hole gets narrower with increasing depth. This is on that Operating Principle attributed to a step drill.
Price-performance ratio
and consumer reviews
ℹ️ Finally, let's talk about how the product compares to the competition. Can it keep up with the competition in terms of price and quality? Would we generally recommend a purchase? We also examine consumer reviews and verify that the critical and positive reviews are actually justified.
Criterion | Remark | Points scored* |
---|---|---|
Price-performance ratio | Very good performance in the lower price segment | 90 points |
rating cut | 4,7 out of 5,0 on Amazon | 85 points |
Total | 88 points |
*The maximum number of points is 100 points
On the platform Amazon Consumers give the product an average rating of 4,7 stars given. It is often criticized that the drill would become blunt very quickly. Many customers really like the quality of the drill and the packaging. In our practical test, we were able to confirm that the quality and packaging are very good. We cannot confirm that the drill dulls quickly.
For equivalent products, prices are quoted on the Internet from up to € 65 required. Very inexpensive products are already available from € 8. The Step drills from Moneystrong is currently at a price of 22,90 € thus in lower price segment. For the quality and scope of services you get, that is Price ratio very good.
Advertising
Gesamtergebnis
weighting | Points scored* | |
---|---|---|
1. Packaging & Labels | 10% | 97 points |
2. Package Contents & Instructions | 10% | 97 points |
3. Product Processing & Appearance | 20% | 100 points |
4. In the practical test | 40% | 95 points |
5. Price/Performance & Consumer Ratings | 20% | 88 points |
Total | 95 points |
The Step drills of the brand monkeystrong therefore receives one from us Overall score of 1,3 and has thus been successfully certified for our test seal. The test was Test period 12/22 carried out and entered into our database under the license number 131220223 guided. You can find more information about our testing procedure at www.prüfengel.de/test procedure.
Test result:
1,3